Satisfy AASHTO HS25-44 criterion /Prefabricated Compact Bailey Bridge / 200-Type panel bridge

The 200-Type panel bridge is similar to the 321-Tycb200pe panel bridge from their appearance. The difference is its increased panel height to 2.134m. For some bridge with longer spans, It employed the method of alternating joints between Reinforcement Chords and the joints between panels. This method can decrease inelastic deformation caused by the oversized pinholes. Pre-arch method is used to additionally cut down mid-span and vertical deflection to a larger degree. Bolt-connected components use the orienting sleeve- fixing method to increase accuracy of connections. Shear is created in orienting sleeves and tension is developed in bolts, which increase the usage life of the bolts and ensure the safety of panel bridges. Wind resistant brace is made to be composite type and is connected to transom/girders to improve overall stability of panel bridges. The part between braced frame and panels is fixed through bridging so as to prevent the whole bridge from side bending. After the erection, there will be a pre-arched degree over the span of thebridge. Besides it can be assembled into single-lane bridges. The compact 200 panel bridge can also be assembled into double lane bridge, hence it broadens its application range. It is suitable for the load designs of HS-15, HS-20, HS-25 ,HL-93 and pedrail-50 etc.

Single lane:

Bridge deck net width: 3.15m. Maximum Free Span length: 60.96m
Extra Width Single lane: Bridge deck net width: 4.2m. Maximum Free Span length: 60.96m

Std. Double lanes: Bridge deck net width: 7.35m. Maximum Free Span length: 45.72m

Panel Dimension:3048MMX2134MM(Holes center distance)

Satisfy AASHTO HS25-44 criterion /Prefabricated Compact Bailey Bridge / 200-Type panel bridge Images